Sprayfine A301 3-Stage Turbine HVLP Spray System

Sprayfine A301 3-Stage Turbine HVLP Spray System

(3 reviews) Write a Review
Calculated at Checkout
  • 15 - Days Money Back


All items ship the next business day. Items cannot be backordered. Transit times for US customers range between 1 and 5 business days, depending on your location. All items ship from our Connecticut warehouse. Call us for express shipping: 860-204-9021

Sprayfine® A-301 3-Stage HVLP Turbine Spray System

Efficient 3 stage turbine with dual filters in a louvered case to allow full ventilation and air filtration for performance and longevity.  More power and pressure than other 3 stage turbine systems in its class. Includes professional all metal bleeder gun and remote 1 liter siphon cup assembly. Great to spray a wide range of finishes on cars, boats, planes, wood projects, fencing and more. Ideal for bathtub refinishing.

  • Save Paint, Reduce Overspray!
  • Comes with super high flex lightweight 25' air hose - perfect for auto painting!
  • Produces 134 CFM (cubic feet per minute) air flow
  • Max pressure 6.5 psi
  • Works with standard 120-Volt household electrical outlet!
  • Portable, requires no air compressor!
  • 3-stage, bypass tangential discharge turbine motor (motor cooling air is kept separate from spraying air)
  • Filters are economical and easy to replace!
  • Includes all metal all chrome bleeder gun w/1 qt cup and remote cup/gun assembly
  • 1.3mm projector set installed (other size pro sets available for $30.00 apiece)
  • Includes paint cup holder!
  • Includes cleaning kit and nozzle wrench
  • Supplies heated, dry air - no need for moisture traps!
  • Full 2 year Warranty!
  • Full satisfaction warranty - return for any reason for full refund within 14 days!

What is HVLP?

HVLP turbine motors produce extremely high volumes of over 100 CFM (cubic feet per minute) at very low pressures (3 - 9) psi (pounds per square inch). Compare this to a typical air compressor set-up of 45 - 60 psi at 8 CFM. HVLP turbines supply air at a much lower velocity producing a softer, easier to control spray. This allows you to lay the paint on gently and not blast it on. Benefits of HVLP include less overspray and less paint wastage. Transfer efficiencies can reach 85%, resulting in 30-50% savings on the cost of paint! The quality of the finish is identical to the best high-pressure spray finishes. In addition, the air from the Sprayfine® turbine is heated, eliminating any moisture in the finish being sprayed, and speeding up the flash-off rate, reducing runs and sags!

In some areas of the USA (Southern California for instance), high-pressure spray systems are prohibited in certain industries. HVLP turbine systems automatically comply with all known regulations in North America.


Sprayfine® HVLP turbine gun


  • Professional grade - All metal construction, no rubber or plastic parts - entire gun can be immersed in solvent for cleaning!
  • external packing nut, no need to remove nozzle to adjust needle packing!
  • Fully adjustable spray pattern
  • "twist and click" air cap for vertical fan, horizontal fan, or circular pattern
  • Spring loaded air cap moves in and out by simply turning retaining ring - adjust to spray any size pattern!
  • Material adjustment knob - enables you to control paint output, making small items as easy to spray as large items!
  • Works with any HVLP turbine system!
  • Provides the best atomization in the industry!
  • Projector sets available in the following sizes: 0.5mm, 1.0mm; 1.3mm; 1.5mm; 1.8mm; 2.0mm, 2.2mm
  • Bleeder gun with infinite adjustment of pattern size
  • Comes with 1.3mm projector set installed:
    recommended size for medium viscosity finishes such as:
    varnish, polyurethane, sealer, lacquer, stain, cellulose, automotive, acrylic, oil, creosote, wood primer


Needle/Nozzle selection chart




Needle and Nozzle

Wood Stains, Lacquers, Automotive, Cellulose, Synthetics, Acrylic, Oil


Polyurethane, Glitter Paints, Cellulose, Acrylics, Synthetics, Lacquers, Fluorescents, Wood Stains, Creosote, Wood Primer


Oil Base, Oxides, Primers, Marine Paint, Varnish, Enamels, Multi-Color, Industrial Synthetics


Emulsions, Oxides, Chlorinated Rubber, Zinc Rich Primers


Hammers, Latex, Oil Base Primers, Enamels, Marine, Masonry Paints, Texture Coatings, Heavy Primers, Water and Solvent Based Adhesives



Spray Pattern selection

Spray Pattern Shape:
The Spray pattern is adjusted by turning the ears of the air cap into either a vertical, horizontal, or diagonal position as shown below:



Spray Pattern Size:

To change the spray pattern size, screw the air cap ring in or out accordingly. Turning the ring clockwise will make the pattern bigger (and reduce the atomization). Turning the ring counterclockwise will make the pattern smaller (and increase atomization).


Material Flow Adjustment:

To increase the material flow, turn the adjusting knob on the back of the gun counterclockwise, to decrease the material flow, turn the adjusting knob clockwise


HVLP Advantages


Saves You Time


Reduces work normally done by brush.
Clean up is fast and easy
Less draping and masking is needed


Saves You Money


Cuts material waste from overspray
Transfer efficiency of 85% or better
Save as much as 50% over conventional spray systems





Sprays odd shapes
Pinpoint control
Sprays all surfaces requiring a fine finish
Lightweight, self-contained, portable
Maximum control with minimal overspray or bounceback
You set the spray pattern and delivery



Meets EPA Guidelines For Low VOC Emissions


Spray Virtually Any Material


Automotive Finishes
Solid-body stains
Oil or water-based enamels and house paints
Stone finish paints
Hammer finish
Marine finishes
Chlorinated rubber
Texture coatings


Use it To Spray:

Office Furniture
Bathtubs/shower stalls
Wall tile
Trim Work


  • 5
    Best price superb quality!

    Posted by George Winfield on 20th Oct 2020

    2 part epoxy on bathtubs & ceramic tile. Multi Spec on countertops. Oil & latex on kitchen cabinets. This is a work horse. Absolutely up there with Titan & Graco turbines at half the cost. Expect years of service. I've had mine 7+ yrs, I change the filters as needed. I've probably gone through 20 guns using this one turbine. It's lighter than most. If only all my power tools held up this great. There's absolutely no question which turbine I'll buy when it finally wears out. I guarantee you can't go wrong here.
    Steve Winfield

  • 5
    Outstanding HVLP system

    Posted by John Vandermolen on 4th Oct 2017

    Purchased the Sprayfine HVLP 3 stage turbine and bleeder gun to paint my airplane. Used PPG Dalfleet epoxy primer and single stage polyurethane paint. The gun lays the paint down beautifully and cleanup is a snap. Great product and support!. Even a novice can get outstanding results with this system!

  • 4
    Very pleased tub re-finisher

    Posted by Jeff Kartes on 29th Mar 2016

    I have used this turbine sprayed for about 4 years now and am happy with the results I get. I spray everything from bath tubs to counter tops and this machine consistently gives me the quality I need.