Sprayfine™ HVLP turbine gravity gun
- Professional grade - All metal construction, no rubber or plastic parts - entire gun can be immersed in solvent for cleaning!
- external packing nut, no need to remove nozzle to adjust needle packing!
- Fully adjustable spray pattern
- "twist and click" air cap for vertical fan, horizontal fan, or circular pattern
- Spring loaded air cap moves in and out by simply turning retaining ring - adjust to spray any size pattern!
- Material adjustment knob - enables you to control paint output, making small items as easy to spray as large items!
- Works with any HVLP turbine system!
- Provides the best atomization in the industry!
- Projector sets available in the following sizes: 1.0mm; 1.3mm; 1.5mm; 1.8mm; 2.0mm
- Bleeder gun with infinite adjustment of pattern size
- Comes with 1.3mm projector set installed:
recommended size for medium viscosity finishes such as:
varnish, polyurethane, sealer, lacquer, stain, cellulose, automotive, acrylic, oil, creosote, wood primer - INcludes 600ml aluminum gravity cup
Needle/Nozzle selection chart
Material |
Needle and Nozzle |
Wood Stains |
1.00mm |
Polyurethane, Glitter Paints, Cellulose, Acrylics, Synthetics, Lacquers, Fluorescents, Wood Stains, Creosote, Wood Primer, automotive lacquers, urethanes, enamels, oil base |
1.30mm |
Oil Base, Oxides, Primers, Marine Paint, Varnish, Enamels, Multi-Color, Industrial Synthetics |
1.50mm |
Emulsions, Oxides, Chlorinated Rubber, Zinc Rich Primers |
1.80mm |
Hammers, Latex, Oil Base Primers, Enamels, Marine, Masonry Paints, Texture Coatings, Heavy Primers, Water and Solvent Based Adhesives |
2.00mm |
Spray Pattern selection
Spray Pattern Shape:
The Spray pattern is adjusted by turning the ears of the air cap into either a vertical, horizontal, or diagonal position as shown below:
Spray Pattern Size:
To change the spray pattern size, screw the air cap ring in or out accordingly. Turning the ring clockwise will make the pattern bigger (and reduce the atomization). Turning the ring counterclockwise will make the pattern smaller (and increase atomization).
Material Flow Adjustment:
To increase the material flow, turn the adjusting knob on the back of the gun counterclockwise, to decrease the material flow, turn the adjusting knob clockwise